PysankyUSA

DiamondFinish Clear

DiamondFinish Clear

DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.

(384)

KBS Paint Saver

KBS Paint Saver

KBS Paint Saver is an inert gas paint preserver that stops leftover paints, coatings, and clear coats from skinning over in the original can. One 0.25 oz can of 100% dry argon and nitrogen sprays a heavier-than-air blanket over the paint surface, displacing the oxygen and moisture that cause hardening. Spray 2 seconds for quarts or less and 4 seconds for gallons; one can treats up to 75 cans of paint and works on DiamondFinish Clear, RustSeal, BlackTop, Motor Coater, urethanes, enamels, latex, and all water-based and solvent-based paints.

(14)

DiamondFinish Clear 1K Aerosol

DiamondFinish Clear 1K Aerosol

KBS DiamondFinish Clear 1K Aerosol is a single-component acrylic clear coat that sprays directly onto ferrous metal, aluminum, and cured painted surfaces with no primer and no heat curing. One can covers up to 35 sq. ft. per coat, dries dust free in 3 to 6 minutes, and reaches 5H pencil hardness after 5 days. Available in Gloss (90 to 95 percent gloss) and Satin (45 to 55 percent gloss), it stays UV stable to 250F without yellowing, cracking, or peeling.

$25.00

(46)